Drum Handling - Non Hydraulic:

Drum handling made easy. A good field of vision allows the operator to continually observe the drum being handled. The operator does not leave the drivers seat. The unique Grab Beak design provides a high clamping force, even when travelling over uneven ground. With few moving parts this attachment requires no down time for repairs. These Lifters are suitable for standard 205 litre steel or plastic drums.

The type BGN-1 has been designed to lift a single drum while the type BGN-2 has been designed to lift 2 drums side by side or a single drum by either Grab Beak mechanism. A contoured rest acts at a point low enough down the drum to prevent damage to the drum and its labelling.

The fully automatic clamping action enables safe and precise placement of drums. To grip the drum simply push the arms against drum centre and drive forward. The arms will engage around the drum and lock under the rolling hoop when raised. The heavier the load, the tighter the grip. To release lower down and drive backwards.

The SDL 2 models has been designed to handle either a single drum or two drums.

The safest drum lifter available. This attachment ensures 205L steel drums are moved with 100% security. The drum is quickly clamped via eccentric lock. A further safety catch prevents accidental release.

SPECIFICATIONS:

* 1000kg Safe Working Load
* Unit Weight 60kg
* Load Centre 1160mm
* Pocket Size 165 x 65mm
* Pocket Centres 335mm

Handle rotation using minimum effort for fully controlled tipping, allowing complete emptying of the drum contents.

SPECIFICATIONS:

* 500kg Safe Working Load
* 360 degree Rotation
* Unit Weight 100kg
* Load Centre 900mm
* Pocket Size 160 x 65mm
* Pocket Centres 800mm

Features hand chain operation to allow the drum to be rotated when lifted above the chest height of the operator.

SPECIFICATIONS:

* 500kg Safe Working Load
* 360 degree Rotation
* Unit Weight 90kg
* Load Centre 900mm
* Pocket Size 160 x 65mm
* Pocket Centres 800mm

The extended load centre of this rotator is ideal for long reach applications. With the fork arm pockets at 480mm centres this attachment will fit narrow carriage forklifts.

Available in either Chain Rotation: Type DRW-NC or Handle Rotation: Type DRW-NH

SPECIFICATIONS:

* SWL: 500kg
* Rotation: 360 degrees
* Unit Weight: 130kg
* Load Centre: 1640mm
* Pocket Size: 160 x 65mm
* Pocket Centres: 480mm

By replacing the standard Belly Strap, the PBO option will allow for plastic drums and barrels, as well as standard steel drums to be handled. The dual woven and chain combination Belly Straps hold the drum or barrel firmly in position.

Attachments which can be fitted with the PBO option include:

* DR-NH * DR-NC * CDR-500
* DRW-NH * DRW-NC * DL1000
* SW-NH * SW-NC * DC-R2

NOTE: When the PBO Option is fitted, the Safe Working Load is reduced to 350kg.

This unique rotator allows for sideways drum rotation without need for hydraulics.

Available in either Chain Rotation: Type SW-NC or Handle Rotation: Type SW-NH

SPECIFICATIONS:

* 500kg Safe Working Load
* 360 degree Rotation
* Unit Weight 110kg
* Load Centre 1400mm
* Pocket Size 160 x 65mm
* Pocket Centres 380mm
* Enamel Paint Finish

The fast and economical solution to emptying 205L drums. To release the drum the operator pulls the draw chord from the drivers seat. This unit is ideal for scrap and waste products.

SPECIFICATIONS:

* 500kg Safe Working Load
* 180 degree Rotation
* Unit Weight 100kg
* Load Centre 1000mm
* Pocket Size 160 x 65mm
* Pocket Centres 800mm
* Enamel Paint Finish