Spill Bins for Drum Storage:

The East West Engineering range of SL Spill Bins provide complete protection against damaging and costly chemical spills and are available to cater for one (1), two (2) or four (4) drums. Also available to suit the 1000 litre Intermediate Bulk Containers - refer SL-IBC.

Close spacing support bars allow for large or small drums up to 2000kg SWL. If required, timber pallets will fit within the raised skirt, or drums can be placed directly on the support bars.

All models have a spill capacity of at least 110% containment of the largest drum in accordance with Australian Standards, being classified as "portable" units.

SPECIFICATIONS:

* Safe Working Load: 2000kg
* Finish is Galvanised (all models)

Similar to the type SL Spill Bins, the SLC Spill Bins have the extra advantage of being partly enclosed back and sides with a chain at the front to secure the drums. This type of Spill Bin is available to cater for one (1), two (2) or four (4) drums.

SPECIFICATIONS:

* Safe Working Load: 2000kg
* Finish is Galvanised (all models)

Similar to the type SL4/C Spill Bin, the SL4/CD Spill Bin has the extra advantage of fully enclosed sides and a front opening lockable door for easy access.

The SL4/CD is designed to store 4 x 205 litre drums offering protection against damaging and costly spills.

SPECIFICATIONS:

* Safe Working Load: 2000kg
* Finish is Galvanised

Similar to the type SL4/CD Spill Bin, the SL4/CDL Spill Bin is fully enclosed with a Lid being added to the unit offering total protection from the elements. The Lid is fitted with locking struts, allowing access to ancillary equipment such as pumps, valves etc.

This Spill Bin also comes with the option of Air Vents if required. The SL4/CDL is designed to store 4 x 205 litre drums.

SPECIFICATIONS:

* Safe Working Load: 2000kg
* Finish is Galvanised

The SL-IBC Spill Bins have been specifically designed for IBC's (Intermediate Bulk Containers), and are available in 3 different sizes to suit most IBC's on the market. All units have been designed with close spacing support bars.

All type SL-IBC Spill Bins have a spill capacity of at least 110% of the IBC holding capacity in accordance with Australian Standards, being classified as "portable" units.

SPECIFICATIONS:

* Safe Working Load: 2000kg
* Finish is Galvanised.

Similar to the SL-IBC Spill Bin, this unit provides a support frame which allows the IBC to be in a raised position, useful for decanting directly from the IBC, or allowing easy access for hose couplings to the drain valve. This unit is available in 3 different sizes to suit most IBC's on the market.

All type RS-IBC Spill Bins have a spill capacity of at least 110% of the IBC holding capacity in accordance with Australian Standards, being classified as "portable" units.

SPECIFICATIONS:

* Safe Working Load: 2000kg
* Additional support tray also supplied.
* Finish is Galvanised.

The TSC2 Trolley Spill Bin is designed for rack mounting a single drum. The drum is mounted onto the rack provided for easy drum dispensing.

The Spill Bin is mounted on four 150mm diameter wheels, 2 fixed and 2 swivel, for easy manoeuvring. A drain plug is also provided for draining the bin. The Spill Bin has a galvanised finish.