Safety Cages for Forklifts :

The type WP-N Work platform has been designed to safely carry out tasks of short duration and occasional usage, such as maintenance or stocktake. Manufactured strictly in accordance with AS 2359.1 the type WP-N Work Platform is suitable for a maximum of two people. Supplied standard as a "Flatpack" for on site assembly, or may be supplied fully assembled upon request.

SPECIFICATIONS:

* Safe Working Load: 250kg
* Unit Weight: 110kg
* Pocket Size: 160 x 60mm
* Pocket Centres: 640mm
* Supplied with 2 fixed Harness Anchor Points
* Supplied with Locking Pins
* Zinc Plated Finish

NOTE: The use of this Work Platform on a Forklift truck should not be considered if the lift capacity of that Forklift
is less than 1800kg for a counterbalanced type or 1080kg for a straddle type Forklift.

The type WP-MS Work Platform has been designed to safely carry out tasks of short duration and occasional usage, such as maintenance or stocktake. Manufactured in strict accordance with AS2359 suitable for a maximum of two people, the WP-MS cage has full mesh panels, eliminating any possibility of objects falling from the cage. Supplied standard as "flatpack" for on site assembly, or may be supplied fully assembled upon request.

SPECIFICATIONS:

* Safe Working Load: 250kg
* Unit Weight: 122kg
* Fork Pocket Size: 160 x 60mm
* Pocket Centres: 640mm
* Supplied with 4 fixed Harness Anchor Points
* Supplied with locking pins
* Zinc Plate Finish

NOTE: The use of this Work Platform on a Forklift truck should not be considered if the lift capacity ot that Forklift is less than 1860kg for a counterbalanced type or 1116kg for a straddle type Forklift.

The WP is a fully welded work platform, with a removeable rear protection panel. Work platforms are designed to safely carry out tasks of “short duration” and “occasional usage”, such as maintenance or stocktake.
Manufactured strictly in accordance with AS 2359.1 the WP platform is suitable for a maximum of two people.

SPECIFICATIONS:

* 250kg Safe Working Load
* Unit Weight 115kg
* Paint Finish
* Supplied with Locking Pins

## The use of a Work Platform on a forklift truck should not be considered if the lift capacity of that forklift is less than 1825kg for a Counterbalanced type or 1095kg for a straddle type forklift.

# Optional harness anchor bracket available.

Type WP-OP Order Picking Cage, suitable strictly for "Order Picker" or "Stock Picker" fork trucks.

SPECIFICATIONS (Standard Unit):

* Safe Working Load 1000kg
* Load Centre 600mm
* Unit Weight 180kg
* Handrail Height of 1000mm
* Pocket Size 140 x 65mm
* Pocket Centres 560mm

Built to the same dimensions as the WP-OP, but also fitted with a full width outward opening gate, enabling access to stock where required. Suitable strictly for "Order Picker" or "Stock Picker" fork trucks.

SPECIFICATIONS (Standard Unit):

* Safe Working Load 1000kg
* Load Centre 600mm
* Unit Weight 168kg
* Handrail Height of 1000mm
* Pocket Size 140 x 65mm
* Pocket Centres 560mm

The WP-GC Forklift Goods Cage is suitable for storage and transport of furniture and whitegoods, and is ideal for the transportation of goods between ground and mezzanine levels. Supplied standard with hinged ramp to enable furniture trolleys to be wheeled into the cage. Standard finish is enamel painted.

The WP-GC Forklift Goods Cage is NOT designed or certified to convey personnel.

SPECIFICATIONS:

* Safe Working Load: 1000kg
* Fork Pocket Size: 160 x 60mm
* Fork Pocket Centres: 644mm

Safety cages suitable for gas cylinder storage and transport. The drop ramp allows bottles to be easily rolled into position without lifting. Supplied with loadbinder and chains to securely fasten cylinders of all sizes and combinations.

SPECIFICATIONS:

* Size 1200 x 1200 x 1000mm High
* Capacity 1000kg Safe Working Load
* Unit Weight 120kg