|
Jib Attachments for Forklifts:
Jib Specifications
|
NOTE - When selecting a jib attachment check the pocket centres of the jib you wish to order. Those noted with the prefix SF, ST and SJW are fitted with wide pockets, and generally suit forklifts fitted with special hydraulic tine positioners.
The lift capacities stated are a structural rating for the jib only, and make no claim as to the suitability of the forklift. Actual forklift capacity may be less than the structural capacity of the jib. Check with the forklift supplier for actual working capacities.
In accordance with AS2359.1, when lifting with a jib attachment, the net lifting capacity should be 0.8 times the rating of the forklift, to allow for a swinging load. |
| |
|
|
Type: FJS2.5 Fixed Jib (Short)
|
The type FJS2.5 Fixed Jib (Short) is designed as an affordable general purpose jib able to manoeuvre in confined spaces, with a 2.0 metre reach when fully extended. Simply slide onto the fork tines and secure with safety chain.
The standard finish on this unit is Zinc Plated.
Supplied with Hook and Shackle.
* Safe Working Load: 2500kg Max.
* Load Centre: 790mm
* Unit Weight: 100kg
* Fork Pocket Size: 185 x 65mm
* Fork Pocket Centres: 275mm
* Overall Length when closed: 1.3 metres |
| |
|
|
Type: SFJS2.5 Fixed Jib (Short)
|
The type SFJS2.5 Fixed Jib (Short) is designed as an affordable general purpose jib able to manoeuvre in confined spaces, with a 2.0 metre reach when fully extended. This jib has been fitted with wide pockets suitable for forklifts with special hydraulic tine positioners. Simply slide onto the fork tines and secure with safety chain.
The standard finish on this unit is galvanised
Supplied with hook and shackle.
* Safe Working Load: 2500kg Max
* Fork Pocket Size: 165 x 65mm
* Fork Pocket Centres: 740mm
* Overall Length when closed: 1.3 metres
* Unit Weight: 125kg |
| |
|
|
Type: FJL2.5 Fixed Jib (Long)
|
The type FJL2.5 Fixed Jib (Long) is designed as an affordable general purpose jib with a 3.5 metre reach when fully extended, allowing for long reach lifts. Simply slide onto the fork tines and secure with safety chain.
The standard finish on this unit is Zinc Plated.
Supplied with swivel hook and shackle.
* Safe Working Load: 2500kg Max.
* Load Centre: 950mm
* Unit Weight: 135kg
* Fork Pocket Size: 185 x 65mm
* Fork Pocket Centres: 275mm
* Overall Length Retracted: 2100mm |
| |
|
|
Type: SFJL2.5 Fixed Jib (Long)
|
The type SFJL2.5 Fixed Jib (Long) is designed as an affordable general purpose jib with a 3.5 metre reach when fully extended allowing for long reach lifts. This Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.
The standard finish on this unit is Galvanised.
Supplied with Hook and Shackle.
* Safe Working Load: 2500kg Max
* Fork Pocket Size: 165 x 65mm
* Fork Pocket Centres: 740mm
* Overall Length when closed: 2.1 metres
* Unit Weight: 150kg |
| |
|
|
Type: FJCS45 Fixed Jib (Short)
|
The type FJCS45 Fixed Jib (Short) is designed as an affordable general purpose Jib able to manoeuvre in confined spaces, with a 1.925m reach when fully extended. Simply slide onto the Fork Tines and secure with Safety Chain.
The standard finish on this unit is Zinc Plated.
Supplied with Hook and Shackle.
* Safe Working Load: 4500kg Max
* Fork Pocket Size: 185 x 65mm
* Fork Pocket Centres: 290mm
* Overall Length when closed: 1.255m
* Unit Weight: 95kg |
| |
|
|
Type: FJCL45 Fixed Jib (Long)
|
The type FJCL45 Fixed Jib (Long) is designed as an affordable general purpose Jib with a 3.465m reach when fully extended. Simply slide onto the Fork Tines and secure with Safety Chain.
The standard finish on this unit is Zinc Plated.
Supplied with Hook and Shackle.
* Safe Working Load: 4500kg Max
* Fork Pocket Size: 185 x 65mm
* Fork Pocket Centres: 290mm
* Overall Length when closed: 2.035m
* Unit Weight: 140kg |
| |
|
|
Type: FJS5 Fixed Jib (Short)
|
The type FJS5 Fixed Jib (Short) is designed as an affordable general purpose jib able to manoeuvre in confined spaces, with a 2.0 metre reach when fully extended. Simply slide onto the Fork Tines and secure with safety chain.
The standard finish on this unit is Galvanised.
Supplied with Hook and Shackle.
* Safe Working Load: 4750kg Max
* Fork Pocket Size: 185 x 75mm
* Fork Pocket Centres: 275mm
* Overall Length when closed: 1.3 metres
* Unit Weight: 130kg |
| |
|
|
Type: SFJS5 Fixed Jib (Short)
|
The type SFJS5 Fixed Jib (Short) is designed as an affordable general purpose jib able to manoeuvre in confined spaces, with a 2.0 metre reach when fully extended. This Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.
The standard finish on this unit is Galvanised.
Supplied with Hook and Shackle.
* Safe Working Load: 4750kg Max
* Fork Pocket Size: 185 x 75mm
* Fork Pocket Centres: 875mm
* Overall Length when closed: 1.3 metres
* Unit Weight: 160kg |
| |
|
|
Type: FJL5 Fixed Jib (Long)
|
The type FJL5 Fixed Jib (Long) is designed as an affordable general purpose jib with a 3.5 metre reach when fully extended, allowing for long reach lifts. Simply slide onto the Fork Tines and secure with safety chain.
The standard finish on this unit is Galvanised.
Supplied with Hook and Shackle.
* Safe Working Load: 4750kg Max
* Fork Pocket Size: 185 x 75mm
* Fork Pocket Centres: 275mm
* Overall Length when closed: 2.1 metres
* Unit Weight: 170kg |
| |
|
|
Type: SFJL5 Fixed Jib (Long)
|
The type SFJL5 Fixed Jib (Long) is designed as an affordable general purpose jib with a 3.5 metre reach when fully extended allowing for long reach lifts. This Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.
The standard finish on this unit is Galvanised.
Supplied with Hook and Shackle.
* Safe Working Load: 4750kg Max
* Fork Pocket Size: 185 x 75mm
* Fork Pocket Centres: 875mm
* Overall Length when closed: 2.1 metres
* Unit Weight: 200kg |
| |
|
|
Type: SFJS7.5 Fixed Jib (Short)
|
The type SFJS7.5 Fixed Jib (Short) is designed as an affordable general purpose jib suitable for larger Forklifts and able to manoeuvre in confined spaces, with a 2.0 metre reach when fully extended. This Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.
The standard finish on this unit is Galvanised.
Supplied with Hook and Shackle.
* Safe Working Load: 7500kg Max
* Fork Pocket Size: 180 x 80mm
* Fork Pocket Centres: 875mm
* Overall Length when closed: 1.39 metres
* Unit Weight: 320kg |
| |
|
|
Type: SFJL7.5 Fixed Jib (Long)
|
The type SFJL7.5 Fixed Jib (Long) is designed as an affordable general purpose jib suitable for larger Forklifts with a 3.56 metre reach when fully extended, allowing for long reach lifts. This Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.
The standard finish on this unit is Galvanised.
Supplied with Hook and Shackle.
* Safe Working Load: 7500kg Max
* Fork Pocket Size: 180 x 80mm
* Fork Pocket Centres: 875mm
* Overall Length when closed: 2.19 metres
* Unit Weight: 450kg |
| |
|
|
Type: SFJS10 Fixed Jib (Short)
|
The type SFJS10 Fixed Jib (Short) is designed as an affordable general purpose jib suitable for larger Forklifts and able to manoeuvre in confined spaces, with a 2.0 metre reach when fully extended. This Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.
The standard finish on this unit is Galvanised.
Supplied with Hook and Shackle.
* Safe Working Load: 10,000kg Max
* Fork Pocket Size: 230 x 110mm
* Fork Pocket Centres: 875mm
* Overall Length when closed: 1.39 metres
* Unit Weight: 400kg |
| |
|
|
Type: SFJL10 Fixed Jib (Long)
|
The type SFJL10 Fixed Jib (Long) is designed as an affordable general purpose jib suitable for larger Forklifts with a 3.56 metre reach when fully extended, allowing for long reach lifts. This Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.
The standard finish on this unit is Galvanised.
Supplied with Hook and Shackle.
* Safe Working Load: 10,000kg Max
* Fork Pocket Size: 230 x 110mm
* Fork Pocket Centres: 875mm
* Overall Length when closed: 2.19 metres
* Unit Weight: 515kg |
| |
|
|
Type: TJS2.5 Tilt Jib (Short)
|
The type TJS2.5 Tilt Jib (Short) is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments. A maximum of 1.4 metres can be gained while the Jib can be fully extended to 2.0 metres. Simply slide onto the Fork Tines and secure with safety chain.
The standard finish on this unit is Galvanised.
Supplied with Hook and Shackle.
* Safe Working Load: 2500kg
* Fork Pocket Size: 165 x 65mm
* Fork Pocket Centres: 337mm
* Overall Length when closed: 1.35 metres
* Unit Weight: 130kg |
| |
|
|
Type: STJS2.5 Tilt Jib (Short)
|
The type STJS2.5 Tilt Jib (Short) is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments. A maximum of 1.4 metres can be gained while the Jib can be fully extended to 2.1 metres.
This Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.
The standard finish on this unit is Galvanised.
Supplied with Hook and Shackle.
* Safe Working Load: 2500kg
* Fork Pocket Size: 165 x 65mm
* Fork Pocket Centres: 740mm
* Overall Length when closed: 1.43 metres
* Unit Weight: 160kg |
| |
|
|
Type: TJL2.5 Tilt Jib (Long)
|
The type TJL2.5 Tilt Jib (Long) is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments. A maximum of 2.48 metres can be gained while the Jib can be fully extended to 3.58 metres. Simply slide onto the Fork Tines and secure with safety chain.
The standard finish on this unit is Galvanised.
Supplied with Hook and Shackle.
* Safe Working Load: 2500kg
* Fork Pocket Size: 165 x 65mm
* Fork Pocket Centres: 337mm
* Overall Length when closed: 2.15 metres
* Unit Weight: 180kg |
| |
|
|
Type: STJL2.5 Tilt Jib (Long)
|
The type STJL2.5 Tilt Jib (Long) is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments. A maximum of 2.51 metres can be gained while the Jib can be fully extended to 3.66 metres.
This Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.
The standard finish on this unit is Galvanised.
Supplied with Hook and Shackle.
* Safe Working Load: 2500kg
* Fork Pocket Size: 165 x 65mm
* Fork Pocket Centres: 740mm
* Overall Length when closed: 2.23 metres
* Unit Weight: 205kg |
| |
|
|
Type: TJCL45 Tilt Jib (Long)
|
The type TJCL45 Tilt Jib (Long) is one of our most versatile Forklift Jib attachments in our range, allowing extra height to 2.23m, with a 3.53m reach when fully extended. Simply slide onto the Fork Tines and secure with Safety Chain.
The standard finish on this unit is Zinc Plated.
Supplied with Hook and Shackle.
* Safe Working Load: 4500kg Max.
* Fork Pocket Size: 185 x 68mm
* Fork Pocket Centres: 322mm
* Overall Length when closed 2.1m
* Unit Weight 190kg |
| |
|
|
Type: TJS5 Tilt Jib (Short)
|
The type TJS5 Tilt Jib (Short) is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments. A maximum of 1.36 metres can be gained while the Jib can be fully extended to 2.0 metres. Simply slide onto the Fork Tines and secure with safety chain.
The standard finish on this unit is Galvanised.
Supplied with Hook and Shackle.
* Safe Working Load: 4750kg
* Fork Pocket Size: 185 x 75mm
* Fork Pocket Centres: 370mm
* Overall Length when closed: 1.36 metres
* Unit Weight: 180kg |
| |
|
|
Type: STJS5 Tilt Jib (Short)
|
The type STJS5 Tilt Jib (Short) is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments. A maximum of 1.36 metres can be gained while the Jib can be fully extended to 2.1 metres.
This Jib has been fitted with wide poackets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.
The standard finish on this unit is Galvanised.
Supplied with Hook and Shackle.
* Safe Working Load: 4750kg
* Fork Pocket Size: 185 x 75mm
* Fork Pocket Centres: 875mm
* Overall Length when closed: 1.42 metres
* Unit Weight: 210kg |
| |
|
|
Type: TJL5 Tilt Jib (Long)
|
The type TJL5 Tilt Jib (Long) is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments. A maximum of 2.4 metres can be gained while the Jib can be fully extended to 3.59 metres. Simply slide onto the Fork Tines and secure with safety chain.
The standard finish on this unit is Galvanised.
Supplied with Hook and Shackle.
* Safe Working Load: 4750kg
* Fork Pocket Size: 185 x 75mm
* Fork Pocket Centres: 370mm
* Overall Length when closed: 2.16 metres
* Unit Weight: 240kg |
| |
|
|
Type: STJL5 Tilt Jib (Long)
|
The type STJL5 Tilt Jib (Long) is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments. A maximum of 2.4 metres can be gained while the Jib can be fully extended to 3.65 metres.
This Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.
The standard finish on this unit is Galvanised.
Supplied with Hook and Shackle.
* Safe Working Load: 4750kg
* Fork Pocket Size: 185 x 75mm
* Fork Pocket Centres: 875mm
* Overall Length when closed: 2.22 metres
* Unit Weight: 270kg |
| |
|
|
Type: SJ2 Slip-On Jib
|
Slip-on jib, suitable for most forklifts and fitted in seconds. Two lifting points available. Supplied with a safety swivel hook.
SPECIFICATIONS:
* 2000kg SWL at 500mm Load Centre
* 2000kg SWL at 1000mm Load Centre
* Unit Weight 45kg
* Pocket Size 160 x 65mm
* Pocket Centres 270mm |
| |
|
|
Type: SJW2.5 / SJW4.5 / SJW7 / SJW11 Slip-On Jib
|
A simple slip-on jib with 2 hook positions. With the fork pockets at a wider setting, this style of jib is also well suited to forklifts with fork positioners where they may not be able to slide the fork tines close together. Supplied with safety swivel hook. |
| |
|
|
Type: SBJ6 Fork Truck Battery Jib
|
Jib for removal and replacement of fork truck batteries. Four hook points are provided at 916mm x 510mm centres and two centre hook points are provided to allow this unit to be configured for a four or two point lift. This slip-on Forlift attachment is held to the Forklift by a safety chain and comes complete with 4 safety swivel hooks suspended on 0.5 metre slings.
SPECIFICATIONS:
* 2000kg Safe Working Load
* Load Centre 654mm
* Unit Weight 64kg
* Pocket size 165 x 65mm
* Pocket Centres 255mm |
| |
|
|
Type: GNJ2.5 / GNJ4.5 / GNJ6 Carriage Mount Jib
|
A heavy duty carriage mounted jib offering height and manoeuvrability. |
| |
|
|
Type: CMJ-2Carriage Mounted Jib
|
The CMJ-2 Carriage Mounted Jib has been designed to lift loads up to 1000 kg maximum, and offers additional height and more working area. This unit has been manufactured to suit Class 2 mounting, and is fitted with Quick Release lower carriage hooks for easy installation.
Two hook positions have been incorporated into it's design. The unit is also supplied with a safety swivel hook for lifting. Standard finish is enamel paint, black in colour.
SPECIFICATIONS:
Safe Working Load: 1000 kg at 555 mm load centre
Unit Weight: 65 kg
Carriage Mounting: Class 2
|
| |
|
|
Type: BBP2000 Bulk Bag Lifter
|
A two prong bag lifter ideal for container loading. The operator need not leave their seat to disengage the bag.
OPTIONAL STAND is available.
SPECIFICATIONS:
* 2000kg Safe Working Load
* Unit Weight 200kg
* Load Centre 725mm
* Height above Carriage 400mm
* Prong Centres 800mm |
| |
|
|
Type: BJFL1 Slip-On Bulk Bag Jib
|
A slip-On Bulk Bag Jib attachment designed with 4 lifting points to suit standard Bulk Bags. The Jib is fitted with four (4) safety swivel hooks.
SPECIFICATIONS:
* Safe Working Load 2000kg
* Unit Weight 75kg
* Hook Centres 900mm
* Load Centre 700mm
* Pocket Size 165 x 65mm
* Pocket Centres 640mm |
| |
|
|
| Jib Attachments for Forklifts Product Variations: |
back to top >> |
